
Il live switcher 4K può essere impiegato per la produzione di video dal vivo in una grande varietà di applicazioni come ad esempio lo staging di eventi, la trasmissione da parte di emittenti e veicoli da riprese esterne, le lezioni universitarie, le conferenze e altro ancora, garantendo sempre prestazioni straordinarie.
Il live switcher 4K AV-UHS500, compatibile con 12G-SDI, presenta praticamente tutte le funzioni di base dei modelli di fascia alta più grandi ed è in grado di produrre video in 4K con la stessa operatività dell’HD. Grazie alla sua struttura compatta è estremamente facile da trasportare ed è quindi perfetto per eventi musicali, sportivi, di intrattenimento e molto altro ancora. L’AV-UHS500 offre il supporto multiformato 4K/3G/HD. Inoltre, installando delle unità opzionali è possibile aggiungere fino a 16 ingressi SDI per garantire un funzionamento privo di problemi negli eventi che richiedono molte telecamere.
L’unità è dotata di 5 keyer, tra cui 2 canali di Chroma Key e 2 di PinP, per consentire una grande varietà di effetti di produzione. Lo switcher include anche le funzioni di conversione alto/basso, HDR/SDR e ITU-R BT.2020/BT.709,
pensate per aumentare la flessibilità, in quanto permettono di selezionare l’uscita video appropriata negli ambienti in cui si utilizzano diversi formati. Il live switcher 4K può essere impiegato per la produzione di video dal vivo in una grande varietà di applicazioni come ad esempio lo staging di eventi, la trasmissione da parte di emittenti e veicoli da riprese esterne, le lezioni universitarie, le conferenze e altro ancora, garantendo sempre prestazioni straordinarie.
- Videos
- Immagini
- Brochure
Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
ASSISTENZA GENERALE E DOWNLOAD CONTATTA IL SUPPORTO TECNICOPlease see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
ASSISTENZA GENERALE E DOWNLOAD CONTATTA IL SUPPORTO TECNICOThere are currently no key services available.
Please see below the services available for this product. You can also use this section to access the general Service & Downloads area of the website or contact our Technical Support team.
ASSISTENZA GENERALE E DOWNLOAD CONTATTA IL SUPPORTO TECNICOThere are currently no other services available.
Specifications
Power Supply | AC 100 V to 240 V, 50 Hz/60 Hz |
---|---|
Current Consumption | 1.5 A |
Ambient Operating Temperature | 0°C to 40°C (32°F to 104°F) |
Ambient Operating Humidity | 10% to 90% (no condensation) |
Storage Temperature | 0°C to 40°C (32°F to 104°F) |
Storage Humidity | 10% to 90% (no condensation) |
Peso | Approx. 7 kg ( Approx.15.4 lb) |
Dimensions (W×H×D) | 440 mm x 170 mm x 360 mm (17-5/16 inches x 6-11/16 inches x 14-3/16 inches) (excluding protrusions) |
Signal Formats | 2160/59.94p, 50p, 29.97p*1, 25p*1, 24p*1, 23.98p*1, 1080/59.94p, 50p, 29.97PsF, 25PsF, 24PsF, 23.98PsF, 59.94i, 50i, 720/59.94p, 50p |
Signal Processing | R: G: B 4: 4: 4 8 bit / 4: 2: 2 10 bit (Only for HDMI) Y: CB: CR 4: 2: 2 10 bit |
ME Number | 1ME |
REF Terminal | In Genlock mode: Black burst or Tri-level Sync input signals (with loop-through) • Loop-through output is performed in external sync mode. • If loop-through output is not going to be used, provide a 75 Ω termination. • Connectors : BNC x 2 • Same field frequencies as those of the system formats supported. • With the 24.00p format, Black Burst input signal is not supported. • With the 1080/23.98PsF format, black burst with 10 Field ID (SMPTE318M standard met) or Trilevel Sync signals supported. • BB signals are output from two connectors in the internal sync mode. |
Video Delay Time | 1 line (H): When the frame synchronizer setting is [Off] and neither the up-converter nor the down-converter is operating 1 frame (F): When the frame synchronizer setting is [On] and the up-converter and down-converter are operating • When the signals have passed through PinP, DVE, multi view, down-converter or HDMI IN, a maximum delay of 1 frame is applied in each case |
LAN Terminal | Compatible with 1000BASE-TX and AUTO-MDIX (For IP control) • Connecting cable: LAN cable (CAT5E), max. 100 m (328 ft), STP (Shielded Twisted Pair) cable recommended • Connectors : RJ-45 |
Tally/GPI | INPUT: 8 inputs general-purpose, photocoupler sensing OUTPUT: 19 outputs; selected from R/G tally, general-purpose ALARM: 1 output, open collector output (negative logic) |
Footnote | *1: Support is planned with a firmware update in spring 2020. |